JUra coffee machine fault codes

Jura coffee machines use a combination of maintenance alerts, warning messages and fault codes to help identify problems. This guide explains common Jura error messages, display warnings and troubleshooting steps to help you diagnose faults and keep your machine operating correctly.

  • Jura Coffee Machine Fault Codes & Error Messages

    Jura coffee machines are designed to monitor their own operation and display maintenance reminders, warning messages and fault codes when attention is required.While many Jura models use maintenance notifications rather than large numbers of diagnostic codes, understanding these messages can help you quickly identify the cause of a problem and keep your machine operating correctly.

    Many Jura warnings are linked to routine maintenance such as cleaning cycles, filter replacement, descaling requirements or milk system hygiene. Other messages can indicate water supply problems, blocked components or temperature-related faults.

  • JURA E Codes

    Jura Error 2 meaning Machine temperature is outside its normal operating range. Often occurs if the machine has been stored in a cold environment. Allow the machine to warm to room temperature before use.

    Jura E8 Error 2 meaning Machine temperature protection activated after exposure to cold conditions. Allow the machine to reach room temperature.

    Jura E8 Error 5 meaning Temperature or system protection fault caused by environmental conditions. Warm the machine and restart.

    Jura Other Error Messages meaning Internal system fault. Restart the machine. If the fault remains, professional diagnosis may be required.

  • Fill Water Tank

    Meaning:

    The water tank is empty, incorrectly fitted or not being detected.

    Possible Causes:

    • Empty water tank
    • Tank not seated correctly
    • Float stuck due to limescale
    • Water tank sensor issue

    Recommended Action:

    • Fill the water tank
    • Refit the tank securely
    • Clean and descale the water tank if required
  • HOW TO IDENTIFY YOUR ERROR

    Empty Grounds

    Meaning:

    The coffee grounds container is full and requires emptying.

    Possible Causes:

    • Grounds container full
    • Container removed while machine powered off
    • Counter not reset correctly

    Recommended Action:

    • Empty grounds container
    • Empty drip tray
    • Reinstall both components while machine is switched on
  • Tray Missing

    Meaning:

    The drip tray is missing or not fully inserted.

    Possible Causes:

    • Drip tray removed
    • Tray not seated correctly
    • Misaligned components

    Recommended Action:

    • Remove and reinstall drip tray
    • Check tray rails for obstruction
  • Fill Beans

    Meaning:

    The bean hopper is empty.

    Possible Causes:

    • Empty bean container
    • Coffee bridge preventing bean movement
    • Oily beans causing feeding issues

    Recommended Action:

    • Refill with fresh beans
    • Stir beans gently
    • Clean bean hopper if required
  • Close Cover

    Meaning:

    The bean container aroma preservation cover is open or incorrectly fitted.

    Recommended Action:

    • Refit cover correctly
    • Check for damage to hinges or retaining clips
  • Ready / Clean

    Meaning:

    The machine has reached its cleaning interval and requires a cleaning cycle. Jura machines typically request cleaning after approximately 180 preparations or 80 switch-on rinses.
    Recommended Action:

    • Run the Jura cleaning programme
    • Use genuine Jura cleaning tablets
  • Ready / De-Scale

    Meaning:

    The machine has detected that descaling is required.

    Possible Causes:

    • Hard water
    • Filter not fitted
    • Descaling interval reached

    Recommended Action:

    • Run the Jura descaling programme
    • Use genuine Jura descaling tablets