how to descale a Melitta Solo and perfect milk
guide
How to Descale a Melitta Solo & Perfect Milk
Switch Off the Machine
Switch off the Melitta Solo & Perfect Milk. Remove the water filter from the water tank if fitted. Use Melitta ANTI CALC descaler and follow the safety and dosing instructions on its packaging.
Activate the Descaling Programme
With the machine switched off, press and hold the Steam button and On/Off button simultaneously for approximately 3 seconds. The descaling symbol flashes and the drip tray indicator illuminates.
Prepare the Drip Tray and Cappuccinatore
Empty and reinsert the drip tray. Place the coffee grounds container beneath the Cappuccinatore. Turn the Cappuccinatore control dial to the Hot Water position, with the hot water symbol pointing upwards.
Add the Descaling Solution
Remove and completely empty the water tank. Add Melitta ANTI CALC according to the descaler packaging instructions, then refit the tank. Press the Steam button to begin the first descaling phase, which takes approximately 15 minutes.
Open the Hot Water Valve
When the descaling indicator illuminates, ensure the coffee grounds container remains beneath the Cappuccinatore. Turn the valve switch clockwise fully open. Descaling solution flows intermittently through the Cappuccinatore for approximately 10 minutes.
Empty the Containers
When the drip tray indicator illuminates, empty the drip tray and coffee grounds container. Reinsert the drip tray and position the coffee grounds container beneath the Cappuccinatore again.
Rinse and Refill the Water Tank
Remove the water tank and rinse it thoroughly with clean water. Fill it with fresh tap water to the MAX marking and refit it. Press the Steam button to continue the programme. Rinsing water will flow through the Cappuccinatore.
Close the Valve
When the descaling indicator illuminates again, turn the valve switch anticlockwise until fully closed. The machine directs the remaining rinsing water internally into the drip tray.
Complete the Programme
When the drip tray indicator illuminates, empty the drip tray and coffee grounds container and reinsert them. The programme is complete when the standby indicator illuminates. Refit the water filter if previously removed.
FAQ's
Melitta coffee machine troubleshooting
Diagnose common Melitta coffee machine faults including heating, dispensing, water flow, milk system and power issues.
Read more →Melitta coffee machine fault codes
Understand Melitta fault codes and error messages with clear explanations and recommended support guidance.
Read more →Melitta coffee machine care guides
Diagnose common Melitta coffee machine faults including heating, dispensing, water flow, milk system and power issues.
Read more →Melitta coffee machine by model
Find your model specific support and keep your coffee machine performing at its best.
Read more →