Gaggia Anima Not Pumping Water

Remove the water tank, fill it with fresh water and refit it firmly. Check that the tank seating area is clean and free from debris. An incorrectly positioned tank can prevent the machine from drawing water.

If the machine has run out of water or air has entered the hydraulic circuit, it may require priming. Follow the water-circuit priming instructions shown on the display, with a container positioned beneath the dispensing outlet.

If an INTENZA+ filter is fitted, remove it and follow the manual's instructions for releasing trapped air before refitting. Check whether normal water dispensing resumes. Air trapped in the filter can interfere with water flow.

Gaggia identifies Error 05 as a water-circuit problem associated with trapped air. Remove and reinsert the water tank twice, ensuring it is correctly seated each time. Check that the tank compartment is clean before attempting to operate the machine again.

The Gaggia Anima manual identifies limescale accumulation as a cause of insufficient water dispensing and extended heating times. If water still flows, but at a reduced rate, carry out the manufacturer's descaling programme using a suitable descaler.

If hot water dispenses normally but coffee does not, follow the manual's instructions to remove and clean the brew group. Check the accessible coffee dispensing spouts for residue or blockages. This helps distinguish a coffee-delivery restriction from a general water-supply problem.