De’Longhi Dinamica Plus Not Frothing Milk

The Dinamica Plus milk carafe has an adjustable froth control. Check that the dial is set to the correct froth level for your selected drink and has not been left in the CLEAN position. An incorrect setting can affect milk texture or prevent normal milk preparation.

Milk residue can build up inside the LatteCrema lid and restrict the small passages responsible for drawing and frothing milk. Remove the carafe lid, froth adjustment dial and milk intake tube, then clean the components thoroughly. Pay particular attention to the dial housing and milk passages.

Remove the silicone milk intake tube from beneath the carafe lid and check for dried milk, splits or loose connections. Make sure the tube is clear and firmly fitted when reassembled. A restricted tube can reduce milk delivery, while a poor connection may allow air into the system.

Remove the milk carafe and inspect the connection point on the front of the Dinamica Plus. Check for dried milk deposits, contamination or damaged sealing rings. Clean the accessible connector surfaces carefully and refit the carafe fully. A poor seal can contribute to spluttering and inconsistent frothing.

The Dinamica Plus generally produces the best milk foam using fresh, semi-skimmed or skimmed milk at approximately 5°C. Warm milk can produce large bubbles, thin foam or inconsistent results. Test with freshly refrigerated milk before investigating a possible machine fault.

After preparing milk drinks, turn the carafe adjustment dial to CLEAN and allow the automatic cleaning cycle to finish. This flushes milk residue from the internal passages. If frothing remains poor, carry out a complete carafe clean rather than relying on the automatic rinse alone.